ONE PIECE MAHOGANY STRAT BODY, NITRO LACQUER, WARMOTH, H/S/H front route

[thephatboi]

I have too many guitar parts, need to sell a few: I have a ONE PIECE WARMOTH MAHOGANY STRAT BODY,  NITRO LACQUER,  H/S/H front route, no glue in this body, nice satin nitro finish, all sealed with nitro lacquer, no grain filler. drilled for stock hardtail Fender bridge, so Warmoth, Callaham, Fender etc will all fit, stock 3 screw holes,  strings through body. I paid almost $300 for the body then alot more for the finish, selling for $299, going to ebay soon if I don't sell here. Also have a nice warmoth mahogany strat neck for sale too. reply directly to me at:

thephatboi@hotmail.com

 805 889 3340

[thephatboi]

Going to ebay soon, thanks for looking

[Max]

Give it a few days. I think you just put pics up yesterday.

[thephatboi]

still have this, $300 for a one piece nitro lacquered strat body, new, this would cost over $500 to buy and finish.... can be routed for a tremolo too.

on ebay but will sell direct to forum member for $299:

[thephatboi]

Open to trades for guitar amp/speakers, or studio gear, thanks

[Finch]

nice looking body, unfortunately im strapped for cash and in the middle of a build, good luck selling it tho

[MUYFUE]

Same deal with me. I'm in the middle of an assembly right now on a red strat....Boo...Cause this is much nicer.

Good luck.

[Steve_Karl]

Very nice.
If it were s-s-s and rear routed I'd grab it immediately.

[thephatboi]

Come on guys, buy yourself an early Christmas present; it's a deal!!!

[Max]

It might be time to ebay it.

[tfarny]

What's the weight? Who did the finish? No grain fill - hmmm - I'd like to see a good closeup of the finish itself, and a back pic if possible. I keep trying to forget about this body but you keep bringing it back up!
 It really does look nice in those photos and I have a spare set of BL keystone strat pickups sitting right here, or that could make a cool HH strat.

[thephatboi]

Weight is medium; about 4 lbs. Finish is indeed with no grain filler, just lots of coats Nitro lacquer and sanding in between coats. The end result is not a super thick finish FYI, just enought to fill the grain as be perfectly flat as it should be. Finish was done by me, I have built hundreds of custom guitars, Jackson Brown has one of my basses. Janet Jackson's bassist has one too etc. i used to have a guitar shop in LA out of Nadine's music, as well as my own shop in Hollywood. No wanker finish I promise. I just bought 3 strat bodies and the 2nd one I built was it for me, this was the third, never even had a chance, it might sound better than the one I am keeping for all I know, I am just happy with the other one, so selling this. Send me your email and I will send you better close up pics if you are serious. For some reason I can't seem to upload more pics here. thanks, Sean Ingoldsby

[jay4321]

No grain fill - hmmm - I'd like to see a good closeup of the finish itself, and a back pic if possible.

This please