(Schaller?) Fender "F" logo locking tuners

[Zaman]

These tuners use two little pins instead of screws. Does anyone have any tips on installing these? I need a template for the pins.

Can anyone help? Thanks!

[Tonar8353]

This might work for you.
http://www.stewmac.com/shop/Tools/Jigs/Tuner_Pin_Drill_Jig.html

[jackthehack]

As long as you have the tuner hole reamed correctly, you can install the tuner and tighten the nut down just a bit and the pins will make dents in the wood you can use as a guide to drill the holes for them with.

[jay4321]

This might work for you.
http://www.stewmac.com/shop/Tools/Jigs/Tuner_Pin_Drill_Jig.html

I bought one of these on Tonar's suggestion after some initial reservations about the price - just make your life easy and get one. I've already used it a couple of times and it works with my Schallers just fine. The thing is built well and should last a lifetime.