Redwood/Mahogany Telecaster

AleForce1

Junior Member
Messages
72
Purchased this Warmoth Redwood/Mahogany telecaster earlier this year.

Raw
raw.jpg

I used Tung Oil, then several thin layers of Tru-Oil.

What it looks like in my shop
Inshop.jpg
back.jpg
Outside:
Outside.jpg

I am close to installing a Gotoh Vintage Telecaster Bridge that I purchased from Warmoth as well.
Thinking of installing Lollar Royal T Neck and Special T Bridge pickups with a Lollar 4-way tele pre-wired kit.
I have a Warmoth Roasted Maple Telecaster neck that will will be used for this build.
 
Last edited:
That is beautiful, 4.25 lbs, top route, can't find anything to hate other than my jealousy
 
Only thing I forgot to get were tuners for the roasted maple Warmoth Tele Neck that I will be using.

I don't see the following in the photo:
  • Strap locks or buttons
  • String tree if you plan to use one
  • Neck plate and screws
 
Thanks. I forgot to add those to the photo. I have those items. The previous build I forgot those so I bought extras. It's always the little things.
 
S_P_E_C_T_A_C_U_L_A_R ! ! ! The Redwood is breathing!
Planning to build a Tele with 3 Lollar Charlie Christian (actually it's 2 CCs and a B.S. for the bridge) and I'd love to avoid a pickguard and the metal plate for the pots and switch by chosing rear route for them. Not sure though IF there's some kind of mounting ring for the Charlie Christians.... I chose to have them wood mounted (vs pickguard mounted) and I'd love to have rings around them. Top will be Black Limba and I'd love to see as much of its beauty as possible. Anybody went thru this before?
 
Back
Top